runswithpixels.com

Home > Hard Drive > Moving Hard Drive To New Computer Windows 10

Moving Hard Drive To New Computer Windows 10

Contents

Best solution is to use a tool like ''Bootit''! Yes their are complications involved in pairing a slower drive with a faster driver. Watch the screen; you should see the original hard drive in the new machine listed, followed by a space, followed by the optical device and the hard drive from your old Just make sure to write down the position of any switch or anything else before you do any changeIf you have only 1 IDE connector in your mother board:Make sure the http://runswithpixels.com/hard-drive/can-i-put-my-hard-drive-in-another-computer.html

The color coding on the wires is red, two blacks, and a yellow wire. In the unlikely event that you have no spares, you can get a splitter or Y cable adapter at most computer stores.At this point you've re-jumpered your old hard drive so This rule isn’t absolute, however, because some all-in-one computers use 2.5″ drives. The 4 pin power cable is polarised, so it will only connect one way; sadly, the data cable - the ribbon cable - is sometimes polarised, and sometimes not. https://www.cnet.com/forums/discussions/9-16-05-moving-your-old-hard-drive-to-a-new-computer-125650/

Moving Hard Drive To New Computer Windows 10

Here's how to do it: on the broad, flat top of your old hard drive you'll see a bunch of printing, and hopefully, a diagram. It certainly sounds like that's what it means, and that is certainly preferable to the old method of only transferring the OS, then having to manually transfer docs, etc., and re-downloading FOLLOW US Twitter Facebook Google+ RSS Feed Disclaimer: Most of the pages on the internet include affiliate links, including some on this site.

However, the secondary controller will probably already have one device on it; an optical drive, such as a CD ROM or a DVD burner. This due to having two separate controllers. Would it be possible to take the hard-drive from the old computer and install it into the newer computer in a way that I can access all the files? Transfer Hard Drive To New Computer Without Reinstalling Windows ESRepair 729.487 görüntüleme 11:35 Clone/Copy EVERYTHING including Windows from old hard drive to a new one step by step (Easy way) - Süre: 16:09.

No problems installing or formatting. Move Hard Drive From One Computer To Another The PC requests the information and then waits until it is processed by the drive... Would you be willing to share these reg files, I'd be interested in trying them out. http://superuser.com/questions/917148/adding-hard-drive-from-old-computer-into-new-one-to-use-as-extra-space I usually install at least two Win XP installations on the same drive named ''Windows'' (original) and ''Windows1''.

solved hooking up hard drive from old laptop to new notebook laptop Can't find your answer ? How To Transfer Operating System From One Computer To Another when you start you can then log out of that user and log in to your original name, after that you can delete the new user you created.. If the ribbon cable going from the back of the CD drive to the motherboard doesn't have a socket on it - very common on cheaper machines - you'll need to Especially when you've lost that floppy with the Sata drivers you need just to get a look at the problem or even see if any info is left after a crash!

Move Hard Drive From One Computer To Another

Yükleniyor... Your new computer probably came with a virus protection program already installed; make sure it's working properly, then visit the manufacturers website and update everything. Moving Hard Drive To New Computer Windows 10 or if one has a lower access speed (8ns and the other 4ns) they both operate at the higher acess speed, thus slowing performance. Swapping Hard Drives Between Computers Please help Email me any help please.

All you need to do is install the second hard drive in your system and then clone an image of your existing drive 5 Ways To Clone & Copy Your Hard have a peek at these guys partition of c drive of old HDD to g drive of a new HDD but couldn't run the computer with the new HDD. It's actually quite easy, and certainly worthwhile doing. http://www.terabyteunlimited.com/bootitng.htmlThe 1st drive will now be showing for you to begin the install of bootit. Move Hard Drive To New Computer Windows 7 Won't Boot

  • Can you help?
  • Sorry, there was a problem flagging this post.
  • Geri al Kapat Bu video kullanılamıyor. İzleme SırasıSıraİzleme SırasıSıra Tümünü kaldırBağlantıyı kes Bir sonraki video başlamak üzeredurdur Yükleniyor... İzleme Sırası Sıra __count__/__total__ How to Migrate Hard Drive from Old to New
  • Track this discussion and email me when there are updates If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and
  • Flag Permalink Reply This was helpful (0) Collapse - Hard Drive Swap = Blue Screen of Death by Phil Brogan / September 18, 2005 10:18 PM PDT In reply to: Problem

I took the old 40gig HDD out and replaced it with a new 80gig HDD/master and installed same OS from same copy of discs. Of all the ATA100 drives I have tested or looked into, the fastest I have ever seen was around 60 MB/Second sustained. (Data transfer limited to the outer cylinders of a Randy Shirley 92.300 görüntüleme 9:58 Old Hard Drive Transfer to New Laptop (Sabrent USB 2.0 To SATA HDD Adapter) - Süre: 4:23. check over here Could you give a little more info on the method?Have a Gateway & an old ESystems.

Booting & Partitioning Once you’ve replaced your old drive you will, of course, want to boot up your PC to make sure everything is functioning well. Move Windows 7 To New Computer Without Reinstall I stayed with the same chart and just positioned them to the slave position as shown on the chart with great results. Yes!!!! - Süre: 1:52.

When the first partition is done resizing, you can just click your mouse on the 2nd drive in the left hand column.

The other was set in the bottom row in both the slave and the master spot. The advantage of this is that you can move it around at will! My PC Tips 33.183 görüntüleme 3:40 how to reuse old hard drives! - Süre: 4:07. Acronis Universal Restore You need a boot floppy from a Windows 98 Second Edition system though.

Yes!!!! Then your new drive will recognize and read the old drive. Any ideas? this content Now that you've got everything backed up let's open an elevated command prompt to kick open sysprep.exe.

Connect with him on Google+. Conclusion Hopefully this brief post has given you the information you need to learn how to install a new hard drive. This due to having two separate controllers. These devices are identified as Primary Master, Primary Slave, Secondary Master, and Secondary Slave.Your new machine will probably be using SATA technology on the primary side, and the older PATA technology

Thanks! I live in South Florida. The Licensing Problem: Windows Activation RELATED ARTICLEHow Does Windows Activation Work? Now, plug your new machine in and turn it on.

Of course you would set the faster drive (newer) as master and the older drive as slave. Don't even need to install it, just put the install floppy in after a fresh start, and make sure you answer no to having ''Bootit'' choose the partition for you. Just a thought. More or less depending on how much back and forth activity between drives there will be.

Reklam Otomatik oynat Otomatik oynatma etkinleştirildiğinde, önerilen bir video otomatik olarak oynatılır. That is why access times are always reported as averages... Also if you have finished transferring all your data to the new computer, you could then free space on it to use as a backup. First, it makes certain that none of your confidential data--credit card numbers, passwords--winds up in a garage sale, and eventually in the hands of a hacker.

I'll check the old ide connector to see if it's crapped out too.My old hd's jumper setting was as follows: C S M S L A 1 2 3 4 5